The two sources we can find when you open a computer can be AT or ATX
AT power supply, were used until the appearance of the Pentium MMX, it is then when you start to use ATX power supplies.
The characteristics of the AT sources, which are connectors to the motherboard used in varied sources ATX, and secondly, perhaps far more dangerous, is that the source is activated through a switch, and switch that is a voltage of 220v, with the risk that the PC would handle.
Also note that compared with the technologically ATX sources, the AT are somewhat rudimentary electronically speaking.
At ATX, is a little different, as it modernizes the circuit from the source, and is always active, even if the computer is not running, provided the source is fed with a little tension to keep waiting.
In this tutorial you learn how to repair these sources
megaupload.com
...............................................................
Las fuentes de alimentación AT, fueron usadas hasta que apareció el Pentium MMX, es en ese momento cuando ya se empezarían a utilizar fuentes de alimentación ATX.
Las características de las fuentes AT, son que sus conectores a placa base varían de los utilizados en las fuentes ATX, y por otra parte, quizás bastante más peligroso, es que la fuente se activa a través de un interruptor, y en ese interruptor hay un voltaje de 220v, con el riesgo que supondría manipular el PC.
También destacar que comparadas tecnológicamente con las fuentes ATX, las AT son un tanto rudimentarias electrónicamente hablando.
En ATX, es un poco distinto, ya que se moderniza el circuito de la fuente, y siempre está activa, aunque el ordenador no esté funcionando, la fuente siempre está alimentada con una tensión pequeña para mantenerla en espera.
En este tutorial el usuario a aprender a reparar dichas fuentes
megaupload.com
No hay comentarios:
Publicar un comentario